Let’s talk about how to remove small dents. Have you ever noticed a small dent in your car and wondered how it got there? Dents are such an eyesore. They’re also unsightly and annoying, as they can ruin the vehicle’s overall appearance and make it more difficult to sell or trade-in. Unfortunately, this can happen quite easily. Dents are never welcome, whether from a run-in with a shopping cart or hail damage. But before you take your car in for an expensive repair, try out these seven ways to remove minor dents from your car. You might be surprised at how well they work!
Use boiling water
One simple way to remove minor dents from your car is to use boiling water. This quick and easy process requires minimal effort, and the results can be quite impressive.
To remove dents using boiling water, simply boil a pot of water on the stove and carefully pour it over the affected area of your car. Be sure to wear protective gloves so that you don’t get burned. Also, use an apron or other protective clothing to protect yourself from any splashes of hot water. Once the water has thoroughly cooled down, gently massaging the dent with your gloved fingers should help to remove it without causing any damage to the surface of your vehicle.
Use a plunger
Another quick and easy way to remove small dents from your car is to use a plunger. This common household tool can be quite effective in getting rid of those pesky dents without causing any damage to your vehicle.
To use a plunger to remove dents from your car, simply place the plunger over the affected area and push and pull the tool up and down with some force. You may need to do this several times before seeing results, but eventually, the plunger suction should help pull the dent out.
Try using a vacuum cleaner
If you don’t have a plunger on hand, another household item that can be used to remove small dents from your car is a vacuum cleaner. This method works similarly to using a plunger, as the vacuum cleaner’s suction can help pull the dent out.
To remove small dents from your car using a vacuum cleaner, simply place the vacuum cleaner over the affected area and turn it on. Make sure that the vacuum cleaner is set to its highest setting so that there’s enough suction to remove the dent. Once you’ve turned on the vacuum cleaner, wait for a few minutes before turning it off and checking to see if the dent has been removed. If not, you can repeat this process until the dent has been successfully removed.
Use WD-40 or another lubricant
Another household item that can be used to remove small dents from your car is WD-40 or another lubricant. This method works by lubricating the area around the dent, which makes it easier to push out.
To use this method, simply spray WD-40 or another lubricant onto the affected area and wait for a few minutes before attempting to remove the dent. Once you’ve waited long enough, try pushing the dent out from the inside with your fingers or a plunger. If the dent is stubborn, you can try using a vacuum cleaner to help remove it.
Use a hairdryer
A hairdryer can also be used to remove small dents from your car. This method works by using the heat from the hairdryer to soften the area around the dent, making it easier to push out.
To use a hairdryer to remove dents from your car, simply aim the hairdryer at the affected area and turn it on to its highest setting. Hold the hairdryer close to the surface of your car and keep it moving so that you don’t overheat one spot. After a few minutes, you should notice that the area around the dent has softened and is more pliable. At this point, you can try pushing the dent out with your fingers or a plunger.
Use a can of compressed air
A can of compressed air can also be used to remove small dents from your car. This method works similarly to using a hairdryer, as the compressed air can help soften the area around the dent and make it easier to remove.
To use a can of compressed air to remove dents from your car, simply aim the nozzle at the affected area and release the trigger. Keep the can moving so that you don’t overheat one spot, and after a few minutes, you should notice that the dent is starting to come out. At this point, you can gently push it out with your fingers or a plunger.
If all else fails, you can try using the pounding method to remove small dents from your car. This method is a bit more aggressive, but it can effectively get rid of stubborn dents.
To use the pounding method, you will need another object smaller than the dent itself, such as a hammer or a plunger. Place the object on the inside of the dent and gently tap it with your hand until the dent pops out. Be careful not to hit the object too hard, as you don’t want to damage your car.
Nobody likes getting dents in their car, but thankfully there are ways to remove them without paying a hefty price. There are many methods that require nothing more than items that are lying around your house. So, before you make an appointment at your local auto body shop, give one or more of these techniques a go. Who knows, maybe you’ll save yourself some time and money in the long run.
Looking for a reliable used car? Providing reliable transportation to customers is what we do here at Carfect. Low credit scores, bad or no credit, no problem. The engine of our business is integrity and respect. Visit us to learn more!